There are several reasons why the pocket doors have gained popularity over the years to become a sought after commodity by both homeowners and contractors. The design of the pocket door is clever such that instead of the door opening or closing by being pulled or pushed outwards, the pocket door is made of a door that slides along some rails that hold it in position into a groove in the wall. This particular type of door has been around for many years but its use has become even more practical since these days the design of the modern houses is smaller thus requires that minimum space is used by such things as doors. Pocket doors require proper planning and precise execution according to the manufacturer’s instructions in order for the homeowner to achieve the best results.
Before the installation has begun, the homeowner should first construct the opening of the door or adjust the design of the existing wall to meet the requirements of the manufacturer. The studs should be vertical to avoid problems during the fitting process. Cut the header and track assembly of the pocket door according to the measurements by the manufacturer preferably using a hacksaw. This header and track assembly should then be installed on the doorjamb at the top using the brackets and fasteners that have been supplied with the door. The end plate should then be nailed on the wall studs.
The homeowners should then attach the split jamb stiffener on the floor bracket and plumb them to find the level before nailing the bracket on the floor and the split jamb to the header. The second pair of stiffeners should then be nailed in the middle of the pocket door. Install the hanging hardware on the top edge of the door before you slide the wheel hangers onto the track and you hang the door on the two hangers and adjust the hangers until the door is plumb.
The door should then be removed and drywall installed over the pocket door. The joints should then be properly sealed with the drywall compound and drywall tape before the door is reinstalled onto the track. The two-piece and head jambs are then nailed in place to hold the pocket door flush against the finished wall surface. Install one side of the head jamb using screws so that you are able to remove it in the event of a problem occurring. A full-width strike jamb should then be installed on the opposite side. The next step is to drill a hole and to chisel a mortise that is shallow on the jamb such that the strike plate engages it. Lastly, install the door casing such that you nail it to the jamb and to the pocket door studs.
There are many advantages of having such types of doors install in your home. It is convenient since it saves on space and it is aesthetically appealing to many people. This therefore makes it a goo d choice for any homeowner.
This type of door is ideal for your property since it saves on the room space required for a regular door. Should you require installing such a door in your property then you require the best contractors to do the job. The best people to do this are the real estate management companies and Ventura property management is reputable company with a ton of experience that will guarantee that your home is managed is the best way in order for you to realize the most returns from your property without the headache of having to carry out such installations by yourself or the need to interact directly with tenants to verify their authenticity before you grant them a lease. This is because Property Management Ventura does an elaborate background check on the tenants and inspections of the property to ensure that they remain the best condition. Check the m out on this link http://bestpropertymanagementventura.com in order to understand more on the incredible services and offers that are available for you as a property owner in Ventura County. You can also use this link http://bestpropertymanagementventura.com/ventura/